B110 100% Restoration Project - Part 2

[Datsunbat]

Hi there!

I decided to create a new topic because of the amount of pictures on the other one!
This is the continuation...

Here are some more pictures from the 1200!
Everyday is becoming alive!
Today I’ll put many photos because I want you to follow the car at the real time!!!
Is not far from thiese ones…
Thanks all for the comments! Sr. Vitorino is amazed with some comments, he liked a lot!!!
It’s a nice guy!!!

Lots of new material and lots of restoration on old parts!!!

Lets roll to the action!!!

Cumps.
Mário

The motos for a bath…




Dafter it, it bacame like this...not bad...









Then we remove all the components...distributor, alternator…and even the supports were restored!


The alternator support...



After a cleaning it became like this...ready to be painted...



The motor prepared to be painted too...



We cut metal pieces to close the holes of the parts missing, its to avoid the paint pulverazation...



And, ready to paint...





1st step...the first layer...its a paint that hold temperature until 600 degrees...

[Datsunbat]

In the end...













No final do dia o aspecto já era bem diferente!!!
Agora já com alguns componentes no sítio até parece outro!!! Ficou quase montado, mas não está ainda terminado!!! O carter do óleo e uns pormenores vão ser pintados brevemente! Pois quando substituir o óleo do motor aproveito que posso tirar a protecção e é pintado nessa altura!!!

Art the endo of the day it became very different...some components fixed...except the carter that will be painted later...













These parts are new. When I stopped the car for the restoration Project I’ve allready fixed it...the motor is with 300 Km’s...





This part tomorrow will be fixed!





The distributor...restored...





We cleaned even the distributor compartment...lots of rust, but acceptable...



And now ready!



The oil pin...

[Datsunbat]

The washer motor...











After Mr. Vitorino treated the part!









Now where it belongs...



Now the car...


Lights...





After a cleaning and fixed...they are new!!! I bought them in January 2008!



The electric system...





Now covered!!!

[Datsunbat]

The front frieze...



The ceiling lining!!! Like the original in my car, the white!!!



The pilars....



On the inside...









The triangular rubber...

before...






Old vs new...




Final result!!!



Another one, I don’t know how its called....



After...








Then applied!!!



I don’t know its name either...



Air grills!!! Beautiful!!! Treated and ready to be applied...

[Datsunbat]

On this door just the rubbers are missing...not much…





After the cleaning, the elevator is brand new…



The worst part...lots of rust....the glass was separated from the metal…and by the end, the parts were new!!!












One general  view...




Some wood parts were made too...this one is the original from the trunk...

before...


And then…but is not ready yet...


Even this part was doubled…lot os imperfections...


It’s just waiting for the final process…


The wheels...ready to be at sandblasting and metalized…then painted…






New side lamps...




A beautiful image...ready to work!

[Datsunbat]

The air entrances appied too...



Is growing day to day....



The car on the inside...

 









And that’s all for today!!!

Hope you enjoy it!!!

[BA]

Wow. Opening your posts takes me allways speechless.
I'm not even complaining about my lowsy internet connection, it takes quite a while for loading these pics. But its worth of it. 8-)

How do we also get those mr. Vitorinos here in Finland? There would be littlebit job to do here also.

Btw. The "blue cylinder" is Ignition Coil in english, and the little white ceramic part is resistor for ignition coil. The metallic "Miyamoto"-part is the Horn-relay, i think.
Can you still get those NOS parts from your Nissan Dealer?

[Datsunbat]

Hi everybody!!!

Thank you for your comments!!!

BA: Thanks for the comment!!! All the parts that my car have are Nos original!!! I don't like onters, and the car is to preserve, so I decided to bulidit up only with original components! There are a few parts very rare to find, but on ebay is almost possible to buy everything!
If you need help with some part pleas tell me! I can see waht I can find!!!

We are almost up to date, because the car isn’t ready yet!!! Tomorrow if I’ve time I’ll put the rest of the photos until the moment!!!
Some stuff is from January…but there are so many pictures and I want to put them all for you to see some details and learn more about this mythic car.

Today I’ll start with the antenna! Very cool! It was cleaned and fixed again!



The lights were cleaned too but the headlamp rings were yet cleaned.



Before...


And after...



Look now...we didn’t resist and start to put the lights puzzle on the car...





These parts were able to put...





Then the grille eyebrow surrounds…




The grill wth all the symbols and...


The final result!!! Awsome!!! I wasn’t believing that the car had the front ready...


We mount the washer nozzle!!!



And also the lights parts on the interior of the car...



The motor! Not ready yet!

[Datsunbat]

The symbols on the back!!!




And the frieze...



And a back photo...



The bumpers meanwhile came from the metalurgic...are new…





And the wheels ready to be painted...


The new shifter ...


The brake caps ...




These rubbers ...for the capôt!



The three thigs together!



And the ID from the car!!!


And Mr. Vitorino plate...it certifies the Project!!!



The rubbers...



The floor rubbers...


The side rubbers...

[Datsunbat]

And the new brake tubes ...

On the front...




On the back...


The horn was cleaned and installed...



In the tablier, we change the electric circuit, I bought a new one and I want to review it before intaled....




Then we set the tablier with the rádio, the ashtray, grills and the glove compartment!




I bought these wheels cap, but they are in a very bad mood...I need to buy some again!...






And the car after some components installed!




Some new-old wheels cap...much better...now I’ll choose which are going to be restored!

[Datsunbat]

The brake pads



The trunk rubber...




These hood bumpers were made by size by my father...



On its place...


And the wheels with the tires...


Mr. Vitorino working...


And for the first time in months the car touch the ground...The first time we are seying it...






And a new wheels to restore...not for this car...but for another that I have!



Cumps.
The hood holdel...


The radiator cap...



The car was all isoladet with gravel...now it’s all protected on the outside…





And the final result!!!

[Datsunbat]

The clutch pump all verified...no need to be substituted...





And ready to fit the car...





The gearbox fixed!!!



The strat motor...



Then the transmission...







The carte protection....



We put also the new rubber and Wheel!

[Datsunbat]

And I bought some more new parts!!!

The interior light!





The battery tray system!







The gearbox rubber...



And the rubbers...









These ones on my car didn’t exist...somebody took them before I bought the car...



And a final photo...



I hope you liked the photos and the advances!!!
Tomorrow I’ll try to put some more photos!!!
And it’s time to see Mr. Vitorino’s garage!!!

Cumps.
Mário

[OH2KV]

Great job Mario.

I can`t see the last pictures, maybe others NCF members can?

After BA:s message, no pictures are available here.

We are very keen to see also your friends garage,  Mr. Vitorino`s whatever cars it includes

PS. Pics are now shown, after waiting a moment.

Esa, OH2KV